TORQUE SPECS

The following torque specs were gathered through various means, and to the best of our ability. We do not guarantee that they are correct, or that the manufacturer has not changed them.

If you think any of the information in incorrect, or have some values that you would like us to add, please let us know at info@fixitsticks.com and we will make the changes.

Thank you.

ACCURACY INTERNATIONAL

AI One Piece Scope Mounts

Ring Cap Screws: 18 in-lbs
Scope Mount Clamp Screws: 31 in-lbs

AT / AX AICS

Action Retaining Screws: 53 in-lbs
Key Slot Accessories: 35 in-lbs
M3 & M3 Stockside Securing Screws: 7 in-lbs

AT / AX Rifles

Butt Pad Screws: 3.5 Nm (31 in-lbs)
Barrel Clamping Screw: 5.5 Nm (49 in-lbs)
Forend Retaining Screws: 5.5 Nm (49 in–lbs)

Aimpoint

Acro C-1/P-1

Mount to Rail: 27 in-lbs
Mount to Sight: 27 in-lbs

Micro H1/H2

Mount to Rail: 18 in-lbs
Mount to Sight: 7 in-lbs

Micro S1

Mount to Rail: 9 in-lbs
Mount to Sight: 9 in-lbs

Micro T-1/T-2

Mount to Rail: 18 in-lbs
Mount to Sight: 7 in-lbs

Micro Mount for Dovetail

Mounting screws for H2: 12 in-lbs
Mounting screws for H1: 7 in-lbs

Micro Tikka T3

Mounting screws: 11.5 in-lbs

AMERICAN RIFLE COMPANY

M10 Scope Rings

Scope Clamp Screws: 50-55 in–lbs
Rail Clamp Screws: 50-55 in–lbs

M10 QD-L Scope Mount

Scope Clamp Screws: 50 in–lbs
Rail Clamp Thumb Screws: Finger Tight

Mausingfield Action

Rail to Receiver Screws: 45 in–lbs

Barloc

Clamping Screw: 90 in–lbs

BADGER ORDNANCE

Scope Mounts

Ring Screws: 15-18 in–lbs
Crossbolts: 65 in–lbs

BARRETT

MRAD

Barrel Retaining Screws: 140 in–lbs
Rail Accessories: 25 in–lbs

Fieldcraft

Front Action Bolt: 80 in–lbs
Rear Action Bolt: 36 in–lbs

BERGARA

Premier & Custom Rifle Series

Action Screws: gradually tighten until 55 in–lbs

B14 Rifle Series

Stock Screws: 7 Nm (62 in–lbs)

DESERT TECH

DT Scope Mount

Base Screws: 80 in–lbs
Ring Screws: 15 in–lbs

HTI

Barrel Retention Screws: 80 in–lbs
Stock Panel Screws: 24 in–lbs
Trigger Position Screw: 24 in–lbs
Trigger Mounting Screws: 24 in–lbs
Sling Stud Screw: 24 in–lbs
Cheek Piece Screw: 24 in–lbs
Rail Segment Screws: 8 in–lbs

SRS

Barrel Retention Screws: 80 in–lbs
Stock Panel Screws: 8 in-lbs
Trigger Screw: 24 in–lbs
Trigger Mounting Screws: 24 in–lbs
Sling Stud Screw: 24 in–lbs
Cheek Piece Screw: 24 in–lbs
Rail Segment Screws: 8 in–lbs

MDR

Barrel Retention Screws: 80 in–lbs
Handguard Screws: 30 in–lbs
DTRO Mount: 30 in–lbs

EOTECH

512/552

Mounting bolt: 17 in-lbs

XPS2/XPS3

Mounting bolt: 17 in-lbs

GEISSELE AUTOMATICS

Super Precision® – AR15 / M4 Scope Mounts

Ring Screws: 15-18 in–lbs
Crossbolts: Do Not Exceed 70 in–lbs

GLOCK

Front sight screw: 6 in–lbs

HAWKE OPTICS

Base screws: 30 in-lbs
Cap screws: 16 in-lbs

HAWKINS PRECISION

Ultra Light Tactical Scope Rings

Ring Screws: 25 in–lbs
Crossbolts: 65 in–lbs

H-S PRECISION

Rifles & Stocks

Action Screws: 65 in–lbs

J ALLEN ENTERPRISES

JAE 700 / 700 XL

Action Screws: 65 in–lbs

JP ENTERPRISES

APAC Chassis

Action Screws: Front 45 in/lb, Rear 30 in–lb
Hand Guard Screws: 32 in–lb
Buttstock Adjustment Plate Screws: 32 in–lb

KAHLES

Ring Screws: 21 in–lbs (max)
Zero Stop Screws: 8 in–lbs
Turret Screws: 8 in–lbs

KINETIC RESEARCH GROUP (KRG)

Whiskey-3 Chassis (Gen 6)

Action Screws: 65 in–lbs

Bravo Chassis

Action Screws: 65 in-lbs
Screw located behind Action Screws: 45 in–lbs (after Action Screws have been tightened)

X-Ray Chassis (Gen 3)

Action Screws: 65 in–lbs

X-Ray Chassis (Gen 2)

Action Screws: 35 – 50 in–lbs

180 X-Ray Chassis

Action Screws: 65 in–lbs

LEUPOLD

Tactical Mounts (including Mark 2, Mark 4, Mark 6, Mark 8)

Ring Screws: 25 in–lbs
Crossbolts: 65 in–lbs

Hunting Mounts

Ring Screws: 25 in–lbs
Base Screws: 45 in–lbs

MANNERS

For Remington size screws / actions

Action Screws: 65 in–lbs Front / 45 in-lbs Rear

MAGPUL

PRO 700 Rifle Chasis

Action Screws: 55-60 in–lbs
Grip Screw (for Trigger Reach adjustment): 35 in–lbs
Butt Pad Retaining Screws: Hand tight to 10 in–lbs

MASTERPIECE ARMS

BA Chassis System

Action Screws: Sequence is as follows: Front- 25 in–lbs then Rear – 25 in–lbs, then Front – 65 in–lbs then Rear – 65 in–lbs

MCMILLAN USA

All Stock Models

Action Screws: 40 – 45 in–lbs

M-LOK ACCESSORIES

Polymer to metal: 15 in–lbs
Polymer to polymer: 15 in–lbs
Metal to metal: 35 in–lbs

MODULAR DRIVEN TECHNOLOGIES (MDT)

MDT Elite / Premier Scope Rings

Ring Cap Screws: 18-20 in–lbs
Ring Base Screws: 25-30 in–lbs

MDT 20 MOA Scope Base / MDT ESS Tall Scope Base

Attachment Screws: 25 in–lbs

MDT ESS Chassis

Action Screws: 60 in–lbs
Forend Attachment Screws: 30 in–lbs

MDT LSS-XL Gen2

Action Screws: 60 in–lbs

MDT Tac21 Chassis

Action Screws: 60 in–lbs

MDT LSS Chassis

Action Screws: 65 in–lbs

MDT HS3 Chassis

Action Screws: 65 in–lbs

MDT LSS-22 Chassis

Actions Screws: 30 in-lbs (adjust torque to improve accuracy)

MDT ESS Chassis

Action Screws: 60 in–lbs
Forend Attachment Screws: 30 in–lbs

NIGHTFORCE

Ring Screws: 25 in–lbs
Crossbolts: 68 in–lbs
Base & Direct Mount attachment screws: 25 in-lbs
Zero Stop Screws: 4 in–lbs
Turret Screws: 4 in–lbs

Note: Crossbolts on six-screw 34mm rings: 100 in–lbs

The Fix

M1913 Accessory Rail Screws: 40 in–lbs
Length of Pull Adjustment Screw: 35-40 in–lbs
Comb Height Adjustment Screw: 35-40 in-lbs
Barrel Nut: 40 ft-lbs (please note this in ft lbs)
Barrel Cross Bolt: 40 in–lbs
Handguard Draw Bolt and Cross Bolt: 40 in–lbs
Top Rail Screws: 40 in–lbs (start at back and work towards front of Handguard)

REMINGTON

700

Front action screw: 55-60 in-lbs
Middle action screw: 40-45 in-lbs
Rear action screw: 15-20 in-lbs

RUGER

10/22

V-block screws: 10-20 in–lbs
Action screw: 15-20 in–lbs (most people seem to prefer 20)

RPR

Barrel Nut: 35-50 ft–lbs (please note this in ft lbs)
Handguard Screws: 25 in–lbs

Ruger American Rifle

Action screws: 60-80 in-lbs

SEEKINS PRECISION

SP15:

NOXs Handguard Screw: 25 in–lbs
SP3R & MCSR Handguard Screws: 25 in–lbs
AR Grip Screw: 25 in–lbs

SP10:

Handguard Screw: 25 in–lbs
AR Grip Screw: 25 in-lbs

Havak:

DBM Set Screw: 20 in–lbs
DBM screws: 55 in–lbs
Scope Base Screws: 25 in–lbs
Misc:
30-35mm Scope Rings: 20 in–lbs (Cap) 50-55 in–lbs (Clamp)
I-inch Scope Rings: 20 in-lbs (Cap) 50-55 in-lbs (Clamp)

SIG SAUER

MCX:

Barrel Screws: 60 in-lbs

MPX:

Barrel Screws: 40 in-lbs

ROMEO zero:

Mounting Screw: 9 in–lbs

SPUHR

Ring Screws: 25 in–lbs
Base Screws: 45 in–lbs
Accessory Screws: 25 in–lbs

SWAROVSKI

Ring Screws: 18 in–lbs

TALLEY MANUFACTURING

Lightweight rings:

Ring Screws: 17-20 in–lbs
Base Screws: 22-25 in–lbs

Steel Fixed Rings:

Top Screw: 20 in–lbs
Bottom Screw: 30 in–lbs

Picatinny Rings:

Ring Screws: 20 in–lbs
Crossbolts: 65 in–lbs

TRIJICON

RMR:

Mounting Screw: 12 in–lbs

US OPTICS

Foundation Series

Turret screws (silver/black): 5 in-lbs

VORTEX

Ring Screws: 18 in–lbs
Base Clamp Screws: 45-50 in–lbs
Zero Stop Screws: 8 in–lbs
Turret Screws: 8 in–lbs

Sparc Solar

Base screws: 20 in-lbs

WARNE

Ring screws: 25 in-lbs
Base clamp screws: 65 in-lbs

XLR INDUSTRIES

Element, Evolution, Evolution HD, Evolution BMG Chassis:

Action Screws: 65 in–lbs
Buffer Tube Set Screw: 10 in–lbs
Grip Screw: 45 in-lbs
Handguard Cap Screws: 35 in–lbs
Trigger Guard: 25 in–lbs

Carbon Chassis:

Action Screws: 65 in–lbs
Buffer Tube Set Screw: 10 in–lbs
Grip Screw: 45 in–lbs
Handguard Cap Screws: 35 in–lbs
Handguard Bottom Bolts: 35 in–lbs
Trigger Guard: 25 in–lbs

Envy Chassis:

Action Screws: 65 in–lbs
Buffer Tube Set Screw: 10 in–lbs
Grip Screw: 45 in–lbs

XLR Scope Rings

Ring Screws: 25 in–lbs
Side Plate: 45 in–lbs

ZRODelta

DLOC-M4 and DLOC-M2 Scope Mount

Ring Screws: 14 in–lbs
Side Knob: 44 in–lbs